Paws-itively Spirited Paws-itively Spirited Paws-itively Spirited
Photos:

Materials List

Paws-itively Spirited

Designed by Allee Marderosian

Who says that spirit wear has to look alike? Here’s your chance to show support for your team and strut your fashion sense at the same time. Make it part of your game plan to throw in a little creativity using Tulip® Fabric Markers®, Tulip® Fabric Spray Paint and Tulip® Iron-On Fashion Designs for a tee that’s a sure winner!

Project Rating:
Rates: 0 Avg: 0
(sign in to rate projects)


Share:
Share
Email
Print

Instructions

Ladies Shirt
  1. Lay shirt flat on clean work surface.
  2. Cut out neckline.
  3. Cut off sleeves a quarter of the way up.
  4. On right shoulder, cut 2” long slits 1/4” apart from one another. Continue down entire sleeve.
  5. Cut same slits on top left shoulder, but not all the way down.
  6. Fold shirt in half with crease down the back and front center of shirt.
  7. Starting in the middle of the front neckline, angle ruler 4 inches toward the fabric and cut slits graduating from longest to shortest. The last cut should be about 1” long.)
  8. Once front slits have been made return shirt to regular fold. Stretch out the front slits cut each one in the center and tie strands in knots.
  9. Cut out large paw print and one small paw print from pattern.
  10. Place pattern pieces on T-shirt where desired. Use Snow Tulip® Fabric Spray Paint and spray over paw prints.
  11. Remove pattern pieces. Let dry.
  12. Down the left sleeve, use Tulip® Fabric Markers® to write “GO D GS!” remembering to leave a space between the D and the G to iron on paw print design.
  13. Cut out each paw print from Tulip® Glam-It-Up! Iron-On Fashion Design pack.
  14. Preheat iron to wool setting.
  15. Peel backing from design.
  16. Position on tee, plastic side up (see photo for placement). Cover with thin cloth.
  17. Press and hold iron over designs for 45-60 seconds. Let cool.
  18. Remove plastic.
  19. Turn inside out and iron back of design for 15-20 seconds.

Guys Shirt


  1. Lay shirt flat on clean work surface.
  2. Cut out two small paw prints from pattern.
  3. Place on desired area of shirt. (Refer to photo for idea placement.)
  4. Use Snow Tulip® Fabric Spray Paint and spray over paw prints.
  5. Remove pattern pieces. Let dry. 


Project Comments

view all comments
Sorry. No comments found for this project.