Instructions
- Prewash T-shirt; do not use fabric softener. Cover work surface with Surface Cover and lay damp T-shirt out flat on prepared surface. Smooth out any wrinkles.
- Wearing plastic gloves, prepare Blue dye as instructed on box. Pour dye into spray bottle.
- Spray bottom third of shirt, completely saturating. Make sure dye soaks through to backside of shirt; if not, spray backside.
- Add water to spray bottle, filling to top, then replace nozzle and shake bottle to dilute color. Spray onto the middle of T-shirt, making sure color soaks through to backside. Refill bottle with water, further diluting color and spray onto remaining portion of T-shirt. Refer to photo.
- Cover T-shirt with plastic tablecloth to keep damp and let set for 6 to 8 hours or longer for more intense color. Fully rinse T-shirt in warm water until water runs clear. Fill washer to large load setting with hottest water suitable for T-shirt and a small amount of laundry soap. Wash and dry separately. Iron smooth.
- Insert Fashion Form between layers of tee. Print out butterfly pattern and enlarge to desired size. Refer to photo.
- Position pattern on tee with transfer paper underneath. Trace over lines to transfer design onto fabric.
- Shake bottle of Black Slick. Test flow of paint on paper towel. Squeeze paint over pattern lines on half of the butterfly.
- Lay sheet of paper carefully over wet paint and press. Remove paper.
- Continue with remainder of butterfly, working in sections at a time and blotting with sheets of paper. Let dry.
- Pour a puddle of Crimson Red on foil or palette. Using the No. 6 Round, paint the heart with two coats of Crimson Red, letting dry between each coat.
- Transfer the word “HOPE” above the butterfly (see picture) or freehand if desired with chalk pencil.
- Pour a puddle of Ebony on foil and using No. 4 Liner, fill in letters with paint. Let dry.
- Use Fashion Art Tweezers to place crystals in peace sign in center of red heart. Set in place with Cordless Heat-Setting Tool, following instructions on package.
- Squeeze a puddle of Glitter Bond on foil. Using the No. 6 Round or the No. 4 Liner, brush some Glitter Bond into the designs on wings and sprinkle a red and silver glitter into adhesive as shown in photo.
- If desired, use Liner to brush a fine line of Glitter Bond around butterfly, then immediately sprinkle silver glitter into glue. Let completely dry then shake off excess glitter.
- Heat set a few more crystals randomly around shirt.
retcust10_096

Wings of Hope Tee
Designed by Suzie ShinsekiTake your creativity to new heights with a whimsical butterfly tee! Add splashes of color with Tulip® One-Step Dye™ then spread your wings with Tulip® fabric paints and Tulip® Fashion Glitter™. Materials List
a79ed352-e2cb-45a3-bebf-d97ef965df52
|
|